A Series Automatic Extrusion    Blow Molding Machine
Common Model
A50 A55
A60 A65
A70 A75
A80 A90
PVC Special Model
A55-P A65-P
A70-P A75-P
Multilayer Obstruct Model
A55-L A65-L
A75-L A40-L
With Line & Double colour
A50-T A55-T
A65-T A50-Y
A55-Y A65-Y
       B Series Automatic Big Extrusion  Blow Molding Machine

Barrel/Case/Auto-parts,etc.Model
B75 B80
B90 B100
B100D B120A
B120B B140
PC 3/5 Gallon Barrel Special
B70PC B80PC
    C Series Automatic Stretch    Blow Molding Machine
 1 Cavity Model C1-2000ML
C1-5000ML
 2 Cavity Model C2-2000ML
 4 Cavity Model C4-2000ML
 6 Cavity Model C6-700ML
     S Series Semi Automatic Stretch Blow Molding Machine
Water,Wine,Oil,etc.Bottle Model
S1500-1 S1500-1C
S2000-1 S2000-1C
S2000-2 S2000-2C
S3000-1 S3000-1C
S3000-2 S3000-2C
S5000-2 S5000-2C
S10000-2C S28000-2C
PET 3/5 Gallon Barrel Special
S25000-2C
PMMA/PC Lampshade Special
S8000-2C S65000-2C
Hot Filling Bottle Special
S2000-2CH S3000-2CH
PP High Temperature Resistance Bottle
S2000-2CP S3000-2CP
Combining High-output Model
S2000-2M S2000-2CM
S3000-2M S3000-2CM
S5000-2M S5000-2CM
Parts  of  Machine
Gearbox Clamping system
Screw Hydraulic system
Inverter Die split shuttle
Oil box Transmission unit
Deflashing Electric system
Conveyer belt Preform autoloader
Touch panel Bottle out unit
Robot arm Clamping unit
Net device Parison controller
Bottom blower Die guide bushing
　
　
　
　
　
 
 ISO9001 
　
　       Date: 
　 　
　 　
　
中文版 Station-master Establish-home Add-favorites 　
　
Home About us Products Moulds Die heads Parts Auxiliary equipments Markets Contact
Your position now[A series automatic extrusion blow moulding machine]

A65 Model full automatic extrusion blow molding machine---including A65D double station machine and A65S single station machine,  this machine can have from 1 to 8 die to meet the demand of different output and different product size for customer. This model is full-automatic process with low noise,saving energy,high efficiency, safe operation,easy maintenance and other benefits. This model is widely used to produce bottles of wine, pesticide, detergent, cosmetic, medicine, mobile oil  and  other hollow products,such as food containers,toys,balls,chemical barrel,water jug,etc.This model can produce max 5L product.

　
　

                                                     ----Click here to see picture of single station A65S machine

　

　

Parameter：
Model A65D A65S
Station number Double station Single station

Double-click video to zoom in
Screw diameter 65mm 65mm
Max. product  volume 2.5L 5L
Output(dry cycle) 800ⅹ2 pc/h 1000 pc/h
Suitable material PE、PP、PA... PE、PP、PA...
Screw L/D ratio 22～30(L/D) 22～30(L/D)
Screw motor power 18.5KW 15kw
Screw heating power 6.2KW 6.7KW
Number of screw heating zone 3 zone 3 zone
Plasticising capacity 70 kg/h(HDPE) 70 kg/h(HDPE)
Oil pump motor power 7.5KW 7.5KW
Clamping force 38 KN 68 KN
Stroke of mould board 138～368mm 148～508mm
Number of moulds 2 set 1 set
Max mould size(W*H) 320ⅹ340mm 370ⅹ390mm

Types of die and station show
Number of die 1、2、3、4、6、8 1、2、3、4、6、8
Max die pin diameter of single die 95mm 145mm
Heating power of single die 2.1KW 2.5KW
Heating zone number of single die 3 zone 3 zone Double-station Single-die Double-station Double-die Double-station Tri-die
Center distance fo double die 140mm 160mm
Max die pin diameter of double die 65mm 80mm
Heating zone number of double die 3 zone 3 zone
Heating power of double die 2.4KW 2.8KW
Blowing pressure 0.6Mpa 0.6Mpa Double-station Tetra-die Single-station Single-die Single-station Tri-die
Air consumption 0.5m3/min 0.5m3/min
Cooling water pressure 0.3Mpa 0.3Mpa 　
Water consumption 45L/Min 50L/Min 　
Average consumption 13KW 15KW 　
Electric Power :    3phase,220/380V,50/60Hz(can be made to order) 　
Overall size(LⅹWⅹH) 2.8ⅹ1.9ⅹ2.5m 2.8ⅹ1.7ⅹ2.5m 　
Weight fo machine 4.5T 5.5T 　
　
Auxiliary equipments Air compressor 0.84m3/min,1.2Mpa,7.5kw,0.2m3   1set
Air tank 0.42m3/0.8Mpa                                   1set
Mould chiller 5HP                                                       1set
　
Basic features Clamping system
Double or single station+high-precision guide+large arm cylinder axle
Extrusion system Hard gear surface reducer+import inverter
Die system Central-incoming extrusion die with special steel
Hydraulic system Import  hydraulic valve and seal+proportional control
Control system Japan PLC+import touch panel+PLC automatic temperature control model+import electronic parts
　
Note: the technical data is not binding and may change without notice.